Revolutionary dewatering rollers


Final Squeezing

RESILIO for final squeezing and padding is available in two versions, RESILIO 100 and RESILIO 150, the latter having increased temperature and abrasion resistance for arduous applications.
 

RESILIO-RESISTOR™ (A, B, C) for harsher environments
  • RESILIO-RESISTOR A – For running in a medium of hot Caustic 90° C or for hot hydrogen peroxide bleaching
  • RESILIO-RESISTOR B – For running in acidic medium including pre-wash
  • RESILIO-RESISTOR C – For running in medium or hot caustic 90° C including pre-wash
 
 
Characteristics RESILIO 100 RESILIO 150 RESILIO - RESISTOR
 Composition  Unique synthetic blend  Unique synthetic blend  Unique synthetic blend
 Temp. Resistance  100°C  150°C  100-150°C
 Abrasion Resistance  Good  Exceptional  Good
 Chemical Resistance      
 Strongly Acidic Medium  Not recommended  Very Good  Good
 Acetic Acid Medium  Medium  Good  Good
 Alkaline Medium  Good  Good  Good
 Fatty Acids, Silicones  Good  Good  Good
 Hardness  82+/- 3° Shore A  82+/- 3° Shore A  82+/- 3° Shore A
 Colour  White  Grey  A = white
 B  = grey
 C = white 
 
  
 
  • Table 1: Resilio Technical Specifications 
  • * The above table is only a general guide. Where there are unusual operating conditions – high temperatures and/or very concentrated aggressive chemical solutions -- it is recommended to consult RHL sales engineers first.

Regrinding and Recovering advice
 
  • The Resilio roll will under normal usage, have a lifetime of 3-4 years. It should be noted that the payback time is less than 6 months. The recommended regrind depth is 0.75 - 1mm diameter.
    When the Resilio roll is ready for recovering, it is only necessary to replace the top layer. The base layer should be replaced every third covering.
     

To download more information on Resilio Final Squeezing Effect please click here
 



Related Files:

Adobe Acrobat DocumentResilio for final squeezing.pdf